https://new.jameshunt.us

libctap.soTest Anything Protocol for C

ctap is an easy way to get Perl-style TAP testing convenience in C. It ships as a standalone shared library that you can link to your tests, and a header file that contains functions and macros for doing things like assertions, skip/todo blocks and dynamic evaluation.

Check it out on GitHub: http://github.com/jhunt/ctap

ctap stays out of your way, letting you focus on writing tests:

#include <ctap.h>
tests {
    ok(1 == 1, "1 does in fact equal 1");
}

When run, this will output:

ok 1 - 1 does in fact equal 1
1..1

This is TAP, so you can use prove and all of its -v option to control output:

$ prove t/01-sample
t/01-sample .. ok
All tests successful.
Files=1, Tests=1,  0 wallclock secs ( 0.02 usr +  0.00 sys =  0.02 CPU)
Result: PASS

$ prove -v t/01-sample
t/01-sample ..
ok 1 - 1 does in fact equal 1
1..1
ok
All tests successful.
Files=1, Tests=1,  0 wallclock secs ( 0.01 usr +  0.01 sys =  0.02 CPU)
Result: PASS

Here's a more complicated example, using some fancier and more well-to-do assertions like isstring and isntnull:

#include <ctap.h>
tests {
    char *s = "a string";

    is_null(NULL, "NULL is a null pointer");
    isnt_null(s, "s is not null");
    is_string(s, "a string", "s is 'a string'");
    is_string(s, "empty",    "s is not 'empty'");
}

And here is the output:

ok 1 - NULL is a null pointer
ok 2 - s is not null
ok 3 - s is 'a string'
not ok 4 - s is not 'empty'
#   Failed test 's is not 'empty''
#   at ./t/01-sample.c line 8.
#          got: 'a string'
#     expected: 'empty'
1..4
# Looks like you failed 1 test of 4.

Building libctap.so -------------------

If you've cloned from the upstream git repo, you'll want to bootstrap:

$ autoreconf -vi

To build, follow the standard process:

$ ./configure
$ make
$ sudo make install

If you want to hack on ctap, don't forget to rebuild all of the autotools files when you make changes to Makefile.am, configure.ac and friends via autoreconf.

Linking with libctap --------------------

It couldn't be easier. Build each test as a standalone executable, and link them with LDFLAGS of -lctap:

$ gcc -c -o t/01-sample.o t/01-sample.c
$ gcc -lctap -o t/01-sample.t t/01-sample.o
$ prove

Assertions, Assertions, Assertions ----------------------------------

ok(test, "message", ...)

The most basic of assertions, and also one of the most flexible.

ok(x == 3, "x was three")
ok(sqrt(y) == 2, "sqrt(y) is 2 (y is %d)", y);

You can write all of your tests using nothing but ok(), but you may want to look at some of the more advanced assertions that give better failure diagnostics.

is(a, b, "message", ...)

Assert that strings a and b are equivalent, even if they point to different memory regions:

is(name, "ctap", "Library name should be ctap");

If either value is NULL, the assertion will fail, since null strings are not logically equivalent.

Strings are taken as standard C-style, NULL-terminated strings. If your strings are not terminated, you can easily overrun the stack.

isnt(a, b, "message", ...)

Assert that strings a and b are different.

isnt(errstr, "Failed to read data", "errstr isnt a read-fail");

If either value is NULL, the assertion will fail.

Strings are taken as standard C-style, NULL-terminated strings. If your strings are not terminated, you can easily overrun the stack.

cmp_ok(a, "op", b, "message", ...)

Compare two values using arbitrary operators. This is slightly more useful than plain old ok(), because it will print both values and the operator via diag() when it fails.

cmp_ok(x(), "!=", y(), "x() and y() are different values");
cmp_ok(f(g()), "==", g(f()), "f() and g() are composable");

pass("message", ...)

Unconditionally pass. The following are equivalent:

pass("works for me!");
ok(1, "works for me!");

fail("message", ...)

Unconditionally fail. The following are equivalent:

fail("broken");
ok(0, "broken");

Diagnostics and Notations -------------------------

diag("message", ...)

Prints a diagnostic message. This message will not interfere with the test output.

diag("sleeping for up to %d seconds", timeout);

Running under prove (without -v) will suppress all output from diag().

note("message", ...)

Works like diag(), except that prove will display the message whether in verbose mode and normal mode (with and without -v).

note("testing %s v%s", PACKAGE, PACKAGE_VERSION);

Skip and Todo Blocks --------------------

ctap supports skip and todo blocks, via the SKIP and TODO macros:

SKIP("not ready for primetime") {
    ok(experimental_function(), "should be ok");
}

TODO("api-internals are still under heavy rework") {
    ok(api_internals(), "should work fine");
}

All tests in a SKIP block will still be run, but ctap will pretend as if they had implicitly succeeded. In a TODO block, test can fail but will not count against the test suite as a normal failure would.

Note: these macros are themselves experimental, and their interfaces may change in future versions of libctap. Do not rely on them in real test suites.

James (@iamjameshunt) works on the Internet, spends his weekends developing new and interesting bits of software and his nights trying to make sense of research papers.

Currently exploring Kubernetes, as both a floor wax and a dessert topping.